Breaking: Inspectors on Oroville Dam
Inspectors seen at the top and bottom of crippled Oroville Dam
For the second time in a little over one months inspectors could be seen making inspections of the headworks and the bottom of the crippled spillway. The last inspection was conducted April 19, 2019 following complaints to the Butte County Sheriff that the spillway had signs of major seam leaks and buckled plates at the radius. The spillway was opened April 2, 2019 and suddenly shutdown April 11, 2019.
Picture NewCali News
NewCali News article from April 11, 2019.
Updated April 11, 2019 11:30 pm
The Oroville dam spillway system was suddenly and unexpectedly shut down after 12:00 pm pst Thursday April 11, 2019. As of this writing there is equipment on the main spillway. At this time there is no explanation as to why the complete shut down of the Hyatt power plant and the main spillway occurred or the nature as to why there appears to be equipment on the spillway deck making repairs.
According to Oroville Mercury-Register there was a planned shutdown.
From the Wednesday April 10, 2019 edition:
“OROVILLE — The state Department of Water Resources stopped releases from the Oroville Dam spillway on Wednesday because of forecasts showing upcoming dry weather.
The department said releases were halted at 1 p.m. on Wednesday. Outflows from the newly reconstructed spillway started at 8,300 cubic-feet per second, or cfs, on April 2 and peaked at 25,000 cfs on April 7.
“Releases over the past 10 days have provided adequate space in the reservoir to help provide flood protection,” said Erin Mellon, assistant director of public affairs, in a written statement. “DWR’s experts, state and federal regulators have concluded the main spillway performed as designed. Once the spillway gates close, a team of engineers will inspect and assess the spillway, and continue to monitor the instrumentation and share those updates with the regulators.”
What was not expected was the complete shut down of both the Hyatt power plant releases and the main spillway. DWR records show that both systems were stopped at 3:00 pm April 11, 2019. Later the system in the Hyatt power plant resumed.
Photo NewCali News April 11, 2019 Copyright 2019
The picture above shows the spillway partially closed but not completely sealed. DWR officials were unable to completely seal the main gates and were forced to expose workers who appeared on the spillway surface to work in several inches of water streaming in a thin sheet down the spillway.
Photo NewCali News April 11, 2019 Copyright 2019
The spillway on the right side dried enough to expose the spillway seams. As the picture above indicates there was a chalky substance that streamed down the spillway in the area where workers were seen using equipment.
Reports to AENN from state officials who do not want to be identified said the spillway failed the inspection. There were no other details regarding the inspector’s reason to “fail” the spillway. But concerned citizens asked the Butte County Sheriff to investigate the spillway’s safety which prompted a meeting with the DWR the general contractor and state officials in Sacramento. The safety concerns were taken to the DWR and the inspection was conducted on April 19, 2019.
It is unknown when the spillway will resume operation.
You going to back up your comments on Susan W chat room with hard written evidence? As they say put up or shut up.
John. How is the troll business?